• "No Music" Making 5 Pound Brass Ingot From Bullet Shells

    "NO MUSIC" Making a 5 pound brass ingot from start to finish. Some bullet casing you see in this video look like metal but they are the nickel plated brass shells. Brass melting point is 1724°F or 940°C Check out this video as well Making 5 Pound Copper Ingot. https://www.youtube.com/watch?v=HiO46UU2Gps Twitter: https://twitter.com/Tito4re Instagram: https://www.instagram.com/tito4re/

    published: 29 Sep 2016
  • Smelting an iPhone 6s in 2600 Degrees Foundry!! Will It Completely Meltdown to Liquid Metal?

    Can you completely melt an iPhone down into its component metal parts using a metal foundry? We collaborated with Kevin from The Backyard Scientist and filmed multiple videos, so stay tuned for the rest of those videos coming soon! Enjoy! ENTER BOTH GIVEAWAYS: Pick-a-Phone Giveaway: http://bit.ly/2h31HZT Christmas Giveaway (10 Best Buy/Amazon gift cards): http://bit.ly/2hbYrfH Check out Backyard Scientist: https://youtube.com/thebackyardscientist Subscribe:https://www.youtube.com/gizmoslip?sub_confirmation=1 Instagram: https://www.instagram.com/gizmoslipofficial Twitter: https://www.twitter.com/gizmoslipblog Facebook: https://www.facebook.com/gizmoslip ----------BONUS VIDEOS---------- Can a Wasp Nest Protect an iPhone 7 from a 100 FT Drop Test?: https://www.youtube.com/watch?v=XD5dPBv...

    published: 24 Dec 2016
  • What metals can I melt in my new furnace?

    I know that my new furnace can melt aluminum quite fast, but what I also wanted to know is can I melt brass and copper. So I made 3 small steel crucibles and tried to melt copper brass and aluminum for comparison. From a cold start the aluminum melted in 14 minutes shortly followed by the brass. Copper melted in half an hour. The ingot mold is made from sand that’s mixed with sodium silicate and hardened with CO2 gas. The resulting ingots weighed aluminum 194g, brass 629g and copper 598g.

    published: 24 May 2017
  • How To Make The Mini Metal Foundry

    How to make a simple backyard foundry for less than $20, for melting pop cans, and casting aluminum. [✓] Clay Graphite Crucible: http://amzn.to/2bZ2ESu [✓] Steel Pail: http://amzn.to/2bSuGAC [✓] Plaster of Paris: http://amzn.to/2bZ0cf0 [✓] 2.5 Quart Bucket: http://amzn.to/2c0l3gk [✓] 5 Quart Big Mouth Bucket: http://amzn.to/2bSvyoz [✓] Heat Resistant Gloves: http://amzn.to/2bSv02d [✓] 1-3/8” Hole Saw: http://amzn.to/2bSvo0z [✓] 3” Hole Saw: http://amzn.to/2cib3kQ [✓] 1” x 12” Steel Pipe: http://amzn.to/2cu3uGU $5 OFF on Harry's shaving products. Coupon Code: THEKINGOFRANDOM http://bit.ly/Harrys5 Endcard Links: Pop Can Metal Melting: https://goo.gl/pTP1uG Secret Safe: https://goo.gl/r0K9jB Acrylic Fire Piston: https://goo.gl/BSl8QT Bottle Rockets: http://bit.ly/HomebrewBottleRockets ...

    published: 13 Jan 2015
  • Melting Aluminum and Copper

    Melting scrap Aluminum and Copper in a homemade propane smelter into 5 pound molds. How to build smelter https://www.youtube.com/watch?v=ERFHI8csAYM Mold Dispenser Link https://www.youtube.com/watch?v=-4mDNJgZTaQ

    published: 23 Oct 2014
  • Melting Cans With The Mini Metal Foundry

    How to recycle scrap metal in the backyard, with a homemade, Mini Metal Foundry. Common materials in the Mini Metal Foundry [✓] Clay Graphite Crucible: http://amzn.to/2bZ2ESu [✓] Steel Pail: http://amzn.to/2bSuGAC [✓] Plaster of Paris: http://amzn.to/2bZ0cf0 [✓] 2.5 Quart Bucket: http://amzn.to/2c0l3gk [✓] 5 Quart Big Mouth Bucket: http://amzn.to/2bSvyoz [✓] Heat Resistant Gloves: http://amzn.to/2bSv02d [✓] 1-3/8” Hole Saw: http://amzn.to/2bSvo0z [✓] 3” Hole Saw: http://amzn.to/2cib3kQ [✓] 1” x 12” Steel Pipe: http://amzn.to/2cu3uGU Get "The Hobbit" http://bit.ly/TKOR-FreeAudiobook - Win the sword: http://bit.ly/WinTheSword Endcard Links: Mini Fire Logs: https://goo.gl/3GIkQX Matchstick Gun: https://goo.gl/ZNMN6L 5 Crazy Science Stunts: https://goo.gl/XkhIGm Gravity Puzzle: https://go...

    published: 29 Dec 2014
  • Extraction of metals by Smelting "Chemistry tutorials Pathshala"

    Extraction of metals present in the middle of the re-activity series Reduction by Carbon from Roasted Ore( Smelting) In this we already studied to extract there are two process or steps 1. Converting sulphide/carbonate ore to metal oxide for carbonate ore, calcination process is used and for sulphide ore, roasting process is used.This is half of the process to get metal oxide, other half will be done by 2.Converting metal oxide to pure metals This can be done by two ways a) Smelting b) Displacement by high reactive metals. Smelting is a process of reduction of metal oxide to metal by carbon. in this, metal oxide(roasted ore) is heated above its melting point in presence of carbon. metal oxide + Carbon(coal,charcoal, coke, etc){Heated above its melting point} = Pure metal(in molten sta...

    published: 03 Apr 2016
  • Melting Jewelry Into a Silver Bar

    Special thanks to Rebecca for donating two bracelets :) This is my first silver pour! I missed a little pouring into the mold but made a 36 gram bar of .925 silver :) SUBSCRIBE: http://full.sc/1bnslc9 FACEBOOK: http://full.sc/1dT2aaM

    published: 29 May 2014
  • Smelting Gold/Silver Sulfides Part 1: Testing Different Collector Metals For Gold Recovery

    I wanted to show some of the experiments we are working on here at MBMM. I want to determine the best collector metal for recovering gold from black sand/sulfide concentrates when smelting. Using a basic flux and metallic iron we have been successful at eliminating the matte phase and ending up with two phases, slag and collector metal. The goal for this video series is to find out the best collector metals for gold and silver when smelting shaker table concentrates without roasting. Stay tuned for part 2

    published: 18 May 2017
  • Making 526 kg (1160 lb) of Aluminium Ingots from Scrap Metal

    In preperation for a large project we melted down around 660 kg of scrap aluminium into ingots. All the aluminium that we use for our castings is a cast alloy of some form. It took us four days to melt everything. The process was not without its hick-ups. In the end we made 160 ingots for a total weight of 526 kg (1160 lb). Our furnaces run on waste oil. We will do a video in the future showing our furnace build. www.facebook.com/australianantart Music: "Crunk Knight" Kevin MacLeod (incompetech.com) Licensed under Creative Commons: By Attribution 3.0 http://creativecommons.org/licenses/by/3.0/

    published: 06 Feb 2017
  • How to Make an Electric Foundry For Metal Casting - Part 1

    In this video I am going to be showing you how to make a metal melting foundry that can melt aluminium in under 20 minuets! This project is probably one of my more dangerous ones combining both extreme temperatures and lethal voltages and all safety precautions should be taken and always wear enough personal safety gear. This project could easily kill you! The video where I upgrade this foundry with a PID temperature controller and many other good thigs is now up! https://www.youtube.com/watch?v=6fvBzlrlKl0 Part 3 upgrades video is now up as well: https://www.youtube.com/watch?v=p7uSGXR8NDs enjoy! My metal casting playlist: https://www.youtube.com/playlist?list=PLiBJ_D3_ZSgKjt42Gl_zhBIl2D9KTP75t Check out my instagram for more updates: https://www.instagram.com/theartofweapons/ All mu...

    published: 22 May 2016
  • Make a ring from melted penies.

    Smelt your own ring with the help of 10 pennies. A lathe isn't needed but sure makes it go alot faster. Check out my shop at http://www.awesomeforsale.com THANKS!

    published: 01 Oct 2012
  • melt metal with magnets

    melt metal with magnets

    published: 16 Apr 2013
  • "Liquid Fire" to Metal Sword in minutes! - A History of Ancient Britain - Ep4 - Preview - BBC Two

    More on this programme: http://www.bbc.co.uk/programmes/b00z597g Neil Oliver experiments with traditional methods of making a Bronze Age sword just like in ancient times.

    published: 01 Mar 2011
  • Smelting Iron in Africa

    Smelting iron from ore by a smith family in West Africa. The only complete, high quality video of iron smelting in Africa. Making charcoal, digging ore and flux, building the kiln, firing the kiln, sacrifices, smelting the iron, forging the iron into tools. With Chinese subtitles. A CULTURAL RECREATION !! THIS WAS DONE FOR ME TO FILM. THEY DO NOT SMELT IRON LIKE THIS ANYMORE.

    published: 20 Sep 2014
  • Making Iron In The Woods - Bloomery Furnace

    Smelting iron from iron ore using a bloomery furnace....by members of the Wealden Iron Research Group. The website for the Wealden Iron Research Group is http://www.wealdeniron.org.uk An application to join the Wealden Iron Research Group can be found on their website. My website is http://www.bucklehurstleather.co.uk

    published: 17 May 2016
  • Primitive Technology: Forge Blower

    I invented the Bow Blower, a combination of the bow drill and forge blower to make a device that can force air into a fire while being easy to construct from commonly occurring natural materials using only primitive technology. I began by fanning a fire with a piece of bark to increase its temperature. It is this basic principle I improved on throughout the project. Next, I made a rotary fan from two pieces of bark that slot together at right angles to each other to form a simple 4 bladed paddle wheel about 20 cm in diameter and 5 cm tall. The blades of the fan were not angled and were designed only to throw air outwards away from the axle when spun. The rotor of the fan was made by splitting a stick two ways so it formed 4 prongs. The fan was then inserted into the prongs and the end las...

    published: 29 Jul 2016
  • silver ore smelting

    Smelting Silver Ore with the KK-6

    published: 17 May 2016
  • Copper Melt

    Making copper bars from scrap copper..i ended up with 25 lbs. of bars

    published: 01 Nov 2015
  • Making History - Malachite & Copper

    Early humans quickly find valuable uses for the first metals. The discovery of copper marks the end of the stone age and entry into more prolific times.

    published: 16 Sep 2009
  • STEEL: From Start to Finish

    A narrated description of the steelmaking process.

    published: 12 Aug 2009
  • Melting 200 aluminium cans

    i took my mini metal foundry and melted down 200 aluminium cans into ingots. surprised to see just how much pure aluminium i got!

    published: 12 Mar 2017
  • Don't Build a Metal Foundry Until you See This First

    Updates, improvements, and all your questions answered about the Mini Metal Foundry. I had no idea so many of you would actually be building this! Common materials in the Mini Metal Foundry [✓] Clay Graphite Crucible: http://amzn.to/2bZ2ESu [✓] Steel Pail: http://amzn.to/2bSuGAC [✓] Plaster of Paris: http://amzn.to/2bZ0cf0 [✓] 2.5 Quart Bucket: http://amzn.to/2c0l3gk [✓] 5 Quart Big Mouth Bucket: http://amzn.to/2bSvyoz [✓] Heat Resistant Gloves: http://amzn.to/2bSv02d [✓] 1-3/8” Hole Saw: http://amzn.to/2bSvo0z [✓] 3” Hole Saw: http://amzn.to/2cib3kQ [✓] 1” x 12” Steel Pipe: http://amzn.to/2cu3uGU Endcard Links: Stealth Shelf: https://goo.gl/PTxLCZ Melting Soda Cans: https://goo.gl/pTP1uG Propane Torch: https://goo.gl/tXsooL Proto-Putty: https://goo.gl/2Y5u3G See What Else I’m Up To...

    published: 18 Nov 2016
  • SMELTING success!! silver metal bar from rock! special guest appearance by rey mysterio!

    here we have success at burn number 7 yielding,.. 26 troy ounce bar,...special guest appearance by rey mysterio

    published: 11 Oct 2013
developed with YouTube
"No Music" Making 5 Pound Brass Ingot From Bullet Shells

"No Music" Making 5 Pound Brass Ingot From Bullet Shells

  • Order:
  • Duration: 7:46
  • Updated: 29 Sep 2016
  • views: 1285683
videos
"NO MUSIC" Making a 5 pound brass ingot from start to finish. Some bullet casing you see in this video look like metal but they are the nickel plated brass shells. Brass melting point is 1724°F or 940°C Check out this video as well Making 5 Pound Copper Ingot. https://www.youtube.com/watch?v=HiO46UU2Gps Twitter: https://twitter.com/Tito4re Instagram: https://www.instagram.com/tito4re/
https://wn.com/No_Music_Making_5_Pound_Brass_Ingot_From_Bullet_Shells
Smelting an iPhone 6s in 2600 Degrees Foundry!! Will It Completely Meltdown to Liquid Metal?

Smelting an iPhone 6s in 2600 Degrees Foundry!! Will It Completely Meltdown to Liquid Metal?

  • Order:
  • Duration: 8:56
  • Updated: 24 Dec 2016
  • views: 3561226
videos
Can you completely melt an iPhone down into its component metal parts using a metal foundry? We collaborated with Kevin from The Backyard Scientist and filmed multiple videos, so stay tuned for the rest of those videos coming soon! Enjoy! ENTER BOTH GIVEAWAYS: Pick-a-Phone Giveaway: http://bit.ly/2h31HZT Christmas Giveaway (10 Best Buy/Amazon gift cards): http://bit.ly/2hbYrfH Check out Backyard Scientist: https://youtube.com/thebackyardscientist Subscribe:https://www.youtube.com/gizmoslip?sub_confirmation=1 Instagram: https://www.instagram.com/gizmoslipofficial Twitter: https://www.twitter.com/gizmoslipblog Facebook: https://www.facebook.com/gizmoslip ----------BONUS VIDEOS---------- Can a Wasp Nest Protect an iPhone 7 from a 100 FT Drop Test?: https://www.youtube.com/watch?v=XD5dPBvBh-M&list=PLD24D235F2F006D98&index=6 Can Oobleck Save iPad Pro 9.7 from a 100 FT Drop Test?: https://youtu.be/4x8gJSGU9K8?list=PLD24D235F2F006D98
https://wn.com/Smelting_An_Iphone_6S_In_2600_Degrees_Foundry_Will_It_Completely_Meltdown_To_Liquid_Metal
What metals can I melt in my new furnace?

What metals can I melt in my new furnace?

  • Order:
  • Duration: 8:09
  • Updated: 24 May 2017
  • views: 79402
videos
I know that my new furnace can melt aluminum quite fast, but what I also wanted to know is can I melt brass and copper. So I made 3 small steel crucibles and tried to melt copper brass and aluminum for comparison. From a cold start the aluminum melted in 14 minutes shortly followed by the brass. Copper melted in half an hour. The ingot mold is made from sand that’s mixed with sodium silicate and hardened with CO2 gas. The resulting ingots weighed aluminum 194g, brass 629g and copper 598g.
https://wn.com/What_Metals_Can_I_Melt_In_My_New_Furnace
How To Make The Mini Metal Foundry

How To Make The Mini Metal Foundry

  • Order:
  • Duration: 7:05
  • Updated: 13 Jan 2015
  • views: 8451355
videos
How to make a simple backyard foundry for less than $20, for melting pop cans, and casting aluminum. [✓] Clay Graphite Crucible: http://amzn.to/2bZ2ESu [✓] Steel Pail: http://amzn.to/2bSuGAC [✓] Plaster of Paris: http://amzn.to/2bZ0cf0 [✓] 2.5 Quart Bucket: http://amzn.to/2c0l3gk [✓] 5 Quart Big Mouth Bucket: http://amzn.to/2bSvyoz [✓] Heat Resistant Gloves: http://amzn.to/2bSv02d [✓] 1-3/8” Hole Saw: http://amzn.to/2bSvo0z [✓] 3” Hole Saw: http://amzn.to/2cib3kQ [✓] 1” x 12” Steel Pipe: http://amzn.to/2cu3uGU $5 OFF on Harry's shaving products. Coupon Code: THEKINGOFRANDOM http://bit.ly/Harrys5 Endcard Links: Pop Can Metal Melting: https://goo.gl/pTP1uG Secret Safe: https://goo.gl/r0K9jB Acrylic Fire Piston: https://goo.gl/BSl8QT Bottle Rockets: http://bit.ly/HomebrewBottleRockets See What Else I’m Up To: Instagram: https://goo.gl/C0Q1YU Facebook: http://bit.ly/FBTheKingOfRandom Pinterest: http://bit.ly/pingrant Business Inquiries: For business and sponsorship inquiries please contact us directly: http://www.youtube.com/thekingofrandom/about WARNING: Charcoal foundries can reach temperatures in excess of 1,000ºC, which is well above the melting point of hobbyists. This project should only be attempted with adequate knowledge and training, proper protective safety gear, and in a fire resistant area with adequate ventilation. The sparks flying from the foundry can ignite fires, and the fumes from burning dross can be toxic. Use caution and common sense. Use of this video content is at your own risk. Music By: Scott & Brendo ("Feel It" - Instrumental) http://bit.ly/ScottBrendoiTunes Project Inspired By: This foundry is an original design, which comes after months of experimenting, and over 10 different prototypes. The functionality is founded on ideas I collected while searching the internet for different furnace designs. Project History & More Info: For this project I experimented with 10 different prototypes, to develop a reusable backyard foundry that melts aluminum soda cans easily and safely. I tested different refractory recipes, different containers, different setting for blowing air, and different types of makeshift crucibles. I tried various ratios of portland cement, sand, perlite, plaster of paris, water, and even kitty litter. For containers, I experimented with clay pots, plastic buckets, no container, cinderblocks, and a galvanized steel pail. I ended up favoring the galvanized steel pail, and a mix of 50% plaster of paris, and 50% play sand, by volume, which was inspired by a video by NightHawkInLight "How to Make a Soup Can Forge" http://bit.ly/IBSoupCanForge Depending on where you get, or find, your materials the cost can range anywhere from $5-$25 per unit. With the materials I used, I was able to make 2 units for under $40 ($20 each). Even on the high end, this is probably one of the cheapest, reliable, backyard foundries that can be made. I used mine to melt soda cans, and extract the aluminum for future metal casting projects. All the soda cans came from a local recycling depot. I bought back 30 lbs from the depot to avoid having to drink gallons and gallons of soda. :) I stored the ingots in various forms, which you can see in the video"Melting Cans With The Mini Metal Foundry" https://goo.gl/pTP1uG The technique for making the sword in that video, and the gun in this video is called "Lost Foam Casting" and will be demonstrated in a future project video.
https://wn.com/How_To_Make_The_Mini_Metal_Foundry
Melting Aluminum and Copper

Melting Aluminum and Copper

  • Order:
  • Duration: 4:50
  • Updated: 23 Oct 2014
  • views: 500644
videos
Melting scrap Aluminum and Copper in a homemade propane smelter into 5 pound molds. How to build smelter https://www.youtube.com/watch?v=ERFHI8csAYM Mold Dispenser Link https://www.youtube.com/watch?v=-4mDNJgZTaQ
https://wn.com/Melting_Aluminum_And_Copper
Melting Cans With The Mini Metal Foundry

Melting Cans With The Mini Metal Foundry

  • Order:
  • Duration: 6:50
  • Updated: 29 Dec 2014
  • views: 16782508
videos
How to recycle scrap metal in the backyard, with a homemade, Mini Metal Foundry. Common materials in the Mini Metal Foundry [✓] Clay Graphite Crucible: http://amzn.to/2bZ2ESu [✓] Steel Pail: http://amzn.to/2bSuGAC [✓] Plaster of Paris: http://amzn.to/2bZ0cf0 [✓] 2.5 Quart Bucket: http://amzn.to/2c0l3gk [✓] 5 Quart Big Mouth Bucket: http://amzn.to/2bSvyoz [✓] Heat Resistant Gloves: http://amzn.to/2bSv02d [✓] 1-3/8” Hole Saw: http://amzn.to/2bSvo0z [✓] 3” Hole Saw: http://amzn.to/2cib3kQ [✓] 1” x 12” Steel Pipe: http://amzn.to/2cu3uGU Get "The Hobbit" http://bit.ly/TKOR-FreeAudiobook - Win the sword: http://bit.ly/WinTheSword Endcard Links: Mini Fire Logs: https://goo.gl/3GIkQX Matchstick Gun: https://goo.gl/ZNMN6L 5 Crazy Science Stunts: https://goo.gl/XkhIGm Gravity Puzzle: https://goo.gl/9WtoHa See What Else I’m Up To: Instagram: https://goo.gl/C0Q1YU Facebook: http://bit.ly/FBTheKingOfRandom Pinterest: http://bit.ly/pingrant Business Inquiries: For business and sponsorship inquiries please contact us directly: http://www.youtube.com/thekingofrandom/about WARNING: Charcoal foundries can reach temperatures in excess of 1,000ºC, which is well above the melting point of hobbyists. This project should only be attempted with adequate knowledge and training, proper protective safety gear, and in a fire resistant area with adequate ventilation. The sparks flying from the foundry can ignite fires, and the fumes from burning dross can be toxic. Use caution and common sense. Use of this video content is at your own risk. Music by: Scott & Brendo ("Skyward" - Instrumental) http://bit.ly/ScottBrendoiTunes Project inspired by: This foundry is an original design, which comes after months of experimenting, and over 10 different prototypes. The functionality is founded on ideas I collected while searching the internet for foundry designs. Background: For as long as I can remember, I've been intrigued by the idea of melting metal and making things with it. The problem has always been that it was out of reach or required really expensive equipment. In this project I experimented with 10 different prototypes, to develop a reusable backyard foundry that melts aluminum soda cans easily and safely. I tested different refractory recipes, different containers, different setting for blowing air, and different types of makeshift crucibles. I tried various ratios of portland cement, sand, perlite, plaster of paris, water, and even kitty litter. For containers, I experimented with clay pots, plastic buckets, no container, cinderblocks, and a galvanized steel pail. I ended up favoring the galvanized steel pail, and a mix of 50% plaster of paris, and 50% play sand, by volume, which was inspired by a video by NightHawkInLight "How to Make a Soup Can Forge" http://bit.ly/IBSoupCanForge Depending on where you get, or find, your materials the cost can range anywhere from $5-$25 per unit. With the materials I used, I was able to make 2 units for under $40 ($20 each). Even on the high end, this is probably one of the cheapest, reliable, backyard foundries that can be made. I used mine to melt soda cans, and extract the aluminum for future metal casting projects. All the soda cans came from a local recycling depot. I bought back 30 lbs from the depot to avoid having to drink gallons and gallons of soda. :) I stored the ingots in various forms, which you can see in the next video, and tried a cool technique for making a little sword by pouring liquid metal into a bucket of sand. I'm planning to make a project video on how to do that in the near future. Thanks for watching, and please share!! :)
https://wn.com/Melting_Cans_With_The_Mini_Metal_Foundry
Extraction of metals by Smelting "Chemistry tutorials Pathshala"

Extraction of metals by Smelting "Chemistry tutorials Pathshala"

  • Order:
  • Duration: 8:02
  • Updated: 03 Apr 2016
  • views: 2594
videos
Extraction of metals present in the middle of the re-activity series Reduction by Carbon from Roasted Ore( Smelting) In this we already studied to extract there are two process or steps 1. Converting sulphide/carbonate ore to metal oxide for carbonate ore, calcination process is used and for sulphide ore, roasting process is used.This is half of the process to get metal oxide, other half will be done by 2.Converting metal oxide to pure metals This can be done by two ways a) Smelting b) Displacement by high reactive metals. Smelting is a process of reduction of metal oxide to metal by carbon. in this, metal oxide(roasted ore) is heated above its melting point in presence of carbon. metal oxide + Carbon(coal,charcoal, coke, etc){Heated above its melting point} = Pure metal(in molten state) + Carbon dioxide( CO2 ) or Carbon monoxide(CO) for example: middle order metals are extract from these process like zinc(Zn),Lead(Pb), Chromium(Cr), Cobalt(Co),Nickel(Ni) etc ZnO + C = Zn + CO ZnO is taken from its ore like ZnCO3 (Zinc carbonate) or ZnSO4 (zinc sulphide) similarly SnO2 + C = Sn + CO2 or PbO + C = Pb + CO and also ferric oxide can be heated with carbon monoxide to form pure Iron. Fe2O3 + 3CO = 2Fe + 3CO2. Check out my playlist for chemistry tutorials: https://www.youtube.com/playlist?list=PLnc3Wj7ZtkaLE6bStudw8zVZs6XPPyLgG Kindly comment, share and suggest Thank you
https://wn.com/Extraction_Of_Metals_By_Smelting_Chemistry_Tutorials_Pathshala
Melting Jewelry Into a Silver Bar

Melting Jewelry Into a Silver Bar

  • Order:
  • Duration: 6:44
  • Updated: 29 May 2014
  • views: 2613886
videos
Special thanks to Rebecca for donating two bracelets :) This is my first silver pour! I missed a little pouring into the mold but made a 36 gram bar of .925 silver :) SUBSCRIBE: http://full.sc/1bnslc9 FACEBOOK: http://full.sc/1dT2aaM
https://wn.com/Melting_Jewelry_Into_A_Silver_Bar
Smelting Gold/Silver Sulfides Part 1: Testing Different Collector Metals For Gold Recovery

Smelting Gold/Silver Sulfides Part 1: Testing Different Collector Metals For Gold Recovery

  • Order:
  • Duration: 11:41
  • Updated: 18 May 2017
  • views: 9898
videos
I wanted to show some of the experiments we are working on here at MBMM. I want to determine the best collector metal for recovering gold from black sand/sulfide concentrates when smelting. Using a basic flux and metallic iron we have been successful at eliminating the matte phase and ending up with two phases, slag and collector metal. The goal for this video series is to find out the best collector metals for gold and silver when smelting shaker table concentrates without roasting. Stay tuned for part 2
https://wn.com/Smelting_Gold_Silver_Sulfides_Part_1_Testing_Different_Collector_Metals_For_Gold_Recovery
Making 526 kg (1160 lb) of Aluminium Ingots from Scrap Metal

Making 526 kg (1160 lb) of Aluminium Ingots from Scrap Metal

  • Order:
  • Duration: 3:28
  • Updated: 06 Feb 2017
  • views: 525105
videos
In preperation for a large project we melted down around 660 kg of scrap aluminium into ingots. All the aluminium that we use for our castings is a cast alloy of some form. It took us four days to melt everything. The process was not without its hick-ups. In the end we made 160 ingots for a total weight of 526 kg (1160 lb). Our furnaces run on waste oil. We will do a video in the future showing our furnace build. www.facebook.com/australianantart Music: "Crunk Knight" Kevin MacLeod (incompetech.com) Licensed under Creative Commons: By Attribution 3.0 http://creativecommons.org/licenses/by/3.0/
https://wn.com/Making_526_Kg_(1160_Lb)_Of_Aluminium_Ingots_From_Scrap_Metal
How to Make an Electric Foundry For Metal Casting - Part 1

How to Make an Electric Foundry For Metal Casting - Part 1

  • Order:
  • Duration: 18:01
  • Updated: 22 May 2016
  • views: 1030736
videos
In this video I am going to be showing you how to make a metal melting foundry that can melt aluminium in under 20 minuets! This project is probably one of my more dangerous ones combining both extreme temperatures and lethal voltages and all safety precautions should be taken and always wear enough personal safety gear. This project could easily kill you! The video where I upgrade this foundry with a PID temperature controller and many other good thigs is now up! https://www.youtube.com/watch?v=6fvBzlrlKl0 Part 3 upgrades video is now up as well: https://www.youtube.com/watch?v=p7uSGXR8NDs enjoy! My metal casting playlist: https://www.youtube.com/playlist?list=PLiBJ_D3_ZSgKjt42Gl_zhBIl2D9KTP75t Check out my instagram for more updates: https://www.instagram.com/theartofweapons/ All music was used with permission from the creator and is royalty free.
https://wn.com/How_To_Make_An_Electric_Foundry_For_Metal_Casting_Part_1
Make a ring from melted penies.

Make a ring from melted penies.

  • Order:
  • Duration: 1:46
  • Updated: 01 Oct 2012
  • views: 557810
videos
Smelt your own ring with the help of 10 pennies. A lathe isn't needed but sure makes it go alot faster. Check out my shop at http://www.awesomeforsale.com THANKS!
https://wn.com/Make_A_Ring_From_Melted_Penies.
melt metal with magnets

melt metal with magnets

  • Order:
  • Duration: 3:31
  • Updated: 16 Apr 2013
  • views: 9562993
videos
melt metal with magnets
https://wn.com/Melt_Metal_With_Magnets
"Liquid Fire" to Metal Sword in minutes! - A History of Ancient Britain - Ep4 - Preview - BBC Two

"Liquid Fire" to Metal Sword in minutes! - A History of Ancient Britain - Ep4 - Preview - BBC Two

  • Order:
  • Duration: 3:14
  • Updated: 01 Mar 2011
  • views: 6237055
videos
More on this programme: http://www.bbc.co.uk/programmes/b00z597g Neil Oliver experiments with traditional methods of making a Bronze Age sword just like in ancient times.
https://wn.com/Liquid_Fire_To_Metal_Sword_In_Minutes_A_History_Of_Ancient_Britain_Ep4_Preview_BBC_Two
Smelting Iron in Africa

Smelting Iron in Africa

  • Order:
  • Duration: 1:44:44
  • Updated: 20 Sep 2014
  • views: 1309168
videos
Smelting iron from ore by a smith family in West Africa. The only complete, high quality video of iron smelting in Africa. Making charcoal, digging ore and flux, building the kiln, firing the kiln, sacrifices, smelting the iron, forging the iron into tools. With Chinese subtitles. A CULTURAL RECREATION !! THIS WAS DONE FOR ME TO FILM. THEY DO NOT SMELT IRON LIKE THIS ANYMORE.
https://wn.com/Smelting_Iron_In_Africa
Making Iron In The Woods - Bloomery Furnace

Making Iron In The Woods - Bloomery Furnace

  • Order:
  • Duration: 9:26
  • Updated: 17 May 2016
  • views: 263827
videos
Smelting iron from iron ore using a bloomery furnace....by members of the Wealden Iron Research Group. The website for the Wealden Iron Research Group is http://www.wealdeniron.org.uk An application to join the Wealden Iron Research Group can be found on their website. My website is http://www.bucklehurstleather.co.uk
https://wn.com/Making_Iron_In_The_Woods_Bloomery_Furnace
Primitive Technology: Forge Blower

Primitive Technology: Forge Blower

  • Order:
  • Duration: 4:32
  • Updated: 29 Jul 2016
  • views: 25131716
videos
I invented the Bow Blower, a combination of the bow drill and forge blower to make a device that can force air into a fire while being easy to construct from commonly occurring natural materials using only primitive technology. I began by fanning a fire with a piece of bark to increase its temperature. It is this basic principle I improved on throughout the project. Next, I made a rotary fan from two pieces of bark that slot together at right angles to each other to form a simple 4 bladed paddle wheel about 20 cm in diameter and 5 cm tall. The blades of the fan were not angled and were designed only to throw air outwards away from the axle when spun. The rotor of the fan was made by splitting a stick two ways so it formed 4 prongs. The fan was then inserted into the prongs and the end lashed to hold it in place. Spinning the fan rotor back and forth between the palms of the hands fanned the fire. But only some of the wind generated by the fan reached the fire. The rest of it was blowing in other directions, effectively being wasted. So I built a fan housing from unfired clay to direct the air flow into the fire. This was basically an upturned pot with a hole in the top, a spout coming out of the side. The housing was about 25 cm wide and 8 cm tall. The hole in the top and the spout were both about 6 cm in diameter so that the air coming in roughly equalled the air coming out. The base of the fan rotor sat in a wooden socket placed in the ground to make it spin easier and the top of the rotor protruded from the hole in the top of the housing. Now when the fan spun, air entered the hole in the top of the housing and exited the spout in the side. Importantly, it doesn’t matter which way the fan spins, air always goes into the inlet and out the spout. Air is thrown out towards the walls of the housing and can only leave through the spout while the vacuum in the centre sucks new air into the housing through the inlet. A separate clay pipe called a tuyere was made to fit over the spout to direct air into the coals. This was done because the pipe that touches the fire can melt away so it’s better to make this part replaceable. Instead of making a large wheel and belt assembly to step up the speed of rotation, I opted for a 75 cm long bow. I made a frame to hold the rotor in place consisting of two stakes hammered into the ground with a socketed cross bar lashed on to hold the top of the rotor. I made bark fibre cordage and tied the end to a stick. I then looped the cord around the rotor and held the other end in the same hand holding the stick. I then pushed and pulled the bow causing the rotor to spin rapidly, forcing air into the fire. I made a simple mud furnace for the blower. Then I collected orange iron bacteria from the creek (iron oxide), mixed it with charcoal powder (carbon to reduce oxide to metal) and wood ash (flux to lower the melting point) and formed it into a cylindrical brick. I filled the furnace with charcoal, put the ore brick in and commenced firing. The ore brick melted and produced slag with tiny, 1mm sized specs of iron through it. My intent was not so much to make iron but to show that the furnace can reach a fairly high temperature using this blower. A taller furnace called a bloomery was generally used in ancient times to produce usable quantities of iron and consumed more charcoal, ore and labour. This device produces a blast of air with each stroke of the bow regardless of whether it is pushed or pulled. The bow makes it possible to operate the blower without using a complicated belt and wheel assembly used in traditional forge blowers. There is a brief pause at the end of each stroke where the fan stops to rotate in the other direction, but this is effectively no different to the intermittent blast of a double acting bellows of Europe or box bellows of Asia. The materials used (wood, bark, bark fibre and clay) are readily available on most continents. No leather, valves or precisely fitted piston gaskets are required as with other types of bellows. The cords for this device wear out often so a number of back up cords should be kept handy for quick replacement. In summary, this is an easy to make device that solves the problem of supplying forced combustion air required for high temperature furnaces and forges. Wordpress: https://primitivetechnology.wordpress.com/ Patreon page: https://www.patreon.com/user?u=2945881&ty=h I have no face book page. Beware of fake pages.
https://wn.com/Primitive_Technology_Forge_Blower
silver ore smelting

silver ore smelting

  • Order:
  • Duration: 20:40
  • Updated: 17 May 2016
  • views: 249029
videos
Smelting Silver Ore with the KK-6
https://wn.com/Silver_Ore_Smelting
Copper Melt

Copper Melt

  • Order:
  • Duration: 2:59
  • Updated: 01 Nov 2015
  • views: 90014
videos
Making copper bars from scrap copper..i ended up with 25 lbs. of bars
https://wn.com/Copper_Melt
Making History - Malachite & Copper

Making History - Malachite & Copper

  • Order:
  • Duration: 3:53
  • Updated: 16 Sep 2009
  • views: 128969
videos
Early humans quickly find valuable uses for the first metals. The discovery of copper marks the end of the stone age and entry into more prolific times.
https://wn.com/Making_History_Malachite_Copper
STEEL: From Start to Finish

STEEL: From Start to Finish

  • Order:
  • Duration: 6:45
  • Updated: 12 Aug 2009
  • views: 1375710
videos
A narrated description of the steelmaking process.
https://wn.com/Steel_From_Start_To_Finish
Melting 200 aluminium cans

Melting 200 aluminium cans

  • Order:
  • Duration: 4:04
  • Updated: 12 Mar 2017
  • views: 164651
videos
i took my mini metal foundry and melted down 200 aluminium cans into ingots. surprised to see just how much pure aluminium i got!
https://wn.com/Melting_200_Aluminium_Cans
Don't Build a Metal Foundry Until you See This First

Don't Build a Metal Foundry Until you See This First

  • Order:
  • Duration: 9:31
  • Updated: 18 Nov 2016
  • views: 7789255
videos
Updates, improvements, and all your questions answered about the Mini Metal Foundry. I had no idea so many of you would actually be building this! Common materials in the Mini Metal Foundry [✓] Clay Graphite Crucible: http://amzn.to/2bZ2ESu [✓] Steel Pail: http://amzn.to/2bSuGAC [✓] Plaster of Paris: http://amzn.to/2bZ0cf0 [✓] 2.5 Quart Bucket: http://amzn.to/2c0l3gk [✓] 5 Quart Big Mouth Bucket: http://amzn.to/2bSvyoz [✓] Heat Resistant Gloves: http://amzn.to/2bSv02d [✓] 1-3/8” Hole Saw: http://amzn.to/2bSvo0z [✓] 3” Hole Saw: http://amzn.to/2cib3kQ [✓] 1” x 12” Steel Pipe: http://amzn.to/2cu3uGU Endcard Links: Stealth Shelf: https://goo.gl/PTxLCZ Melting Soda Cans: https://goo.gl/pTP1uG Propane Torch: https://goo.gl/tXsooL Proto-Putty: https://goo.gl/2Y5u3G See What Else I’m Up To: Instagram: https://goo.gl/C0Q1YU Facebook: http://bit.ly/FBTheKingOfRandom Pinterest: http://bit.ly/pingrant Business Inquiries: For business and sponsorship inquiries please contact us directly: https://www.youtube.com/thekingofrandom/about Music by: Bird Passengers – "Wanderer" https://itunes.apple.com/us/artist/bird-passengers/id959008046 WARNING: This video is only for entertainment purposes. If you rely on the information portrayed in this video, you assume the responsibility for the results. Have fun, but always think ahead, and remember that every project you try is at YOUR OWN RISK.
https://wn.com/Don't_Build_A_Metal_Foundry_Until_You_See_This_First
SMELTING success!! silver metal bar from rock! special guest appearance by rey mysterio!

SMELTING success!! silver metal bar from rock! special guest appearance by rey mysterio!

  • Order:
  • Duration: 10:02
  • Updated: 11 Oct 2013
  • views: 38597
videos
here we have success at burn number 7 yielding,.. 26 troy ounce bar,...special guest appearance by rey mysterio
https://wn.com/Smelting_Success_Silver_Metal_Bar_From_Rock_Special_Guest_Appearance_By_Rey_Mysterio
×